XM10480G LED Driver IC
The XM10480G is an LED display driver chip from Xiamen Xm-Plus recognized by NovaStar's control system. This page covers its specifications, datasheet, and which NovaStar receiving cards and firmware support it.
NovaStar support
| LED Driver IC | XM10480G |
| Manufacturer | Xiamen Xm-Plus |
| Driver type | PWM / constant-current |
XM10480G technical specifications
| Output channels | 48 |
| PWM type | PWM |
| Grayscale (bits) | 16 |
| Max scan | 1-20 single / up to 80 (4-chip scan sharing) |
| Output current (mA) | 0.1-15 (R/G) / 0.1-7.5 (B) |
| Refresh rate (Hz) | 3840 |
| Package | QFN88 (10x10mm, 0.4mm pitch) |
Key features
- common-cathode PWM driving, VLEDR / VLEDGB power input
- Mirage Driving Engine solves 8 fine-pitch visual issues (ghosting, open caterpillar, cross effect, low-gray color shift, first dimming line, high-contrast couple, cross-plate couple, cross-plate gradient CCT)
- 48 channels / 20 scan; 4-chip scan-sharing up to 80 scan
- 16-bit grayscale @ 3840Hz (80 scan)
- 3-wire SPI interface, max 36 chips per channel
- global calibration: 3 calibration parameters (high to low gray level)
- min. calibration pulse width 0.8ns
- power @dark 2.4uA/pixel (16x60 dots)
- power @white 22uW/pixel @ 20mA pixel current
- LED pitch application 0.7-5.0mm
Typical use: fine-pitch to standard indoor, 0.7-5.0mm pitch, common-cathode, scan-sharing up to 80 scan.
NovaStar receiving cards & firmware that drive the XM10480G
Important: each NovaStar receiving card ships several firmware versions, and each one supports a different group of pixel driver ICs paired with a group of row/scan decode chips — the version label selects the chip group, not a newer/older build. A panel is defined by both its driver IC and its decode/scan chip, so the firmware must list both. To drive the XM10480G, flash the exact version listed for your card below; a higher-numbered version meant for a different chip group will not work.
⚠️ Don't upgrade unless you have a reason to. Receiving-card firmware is not like a controller update that adds features — a higher number just means a different driver-IC group. If your screen works, leave it alone; only re-flash to match a different driver IC.
A card name joined with “/” (e.g. DH7516-S / 7512-S / 7508-S) is a single NovaStar firmware family: those models share one firmware package, so the versions shown for that row are different firmware lines for the same card — not one firmware per model.
| Receiving card | Supported firmware |
|---|---|
| A5s Plus | |
| A7s Plus | |
| BR420L | |
| BR460 / BR840 | |
| BR460 Pro | |
| BR480 | |
| BR840 Pro | |
| BR860 Pro | |
| DH3208 | |
| DH418 | |
| DH426 | |
| MRV208-1 | |
| MRV412 | |
| MRV416 | |
| MRV532 | |
| NV3210 / NV7508 / NV7512 / NV7516 | |
| RH460 Plus |
Frequently asked questions
What is the XM10480G LED driver IC?
The XM10480G is an LED display driver chip made by Xiamen Xm-Plus. It is a PWM (constant-current, pulse-width-modulated) driver used on the LED module to control each pixel's grayscale.
Does NovaStar support the XM10480G?
Yes — the XM10480G is in NovaStar's recognized driver-IC library, though it may require manual receiving-card configuration rather than Smart Settings. Exact support depends on your receiving card model and firmware; upload your config to our RCFGX viewer to confirm.
How do I find out which driver IC my LED panel uses?
Open your receiving card configuration file (.rcfgx) — it records the driver IC type and firmware version. Our free online RCFGX viewer reads this for you without installing NovaLCT.