NovaStar MX_2xHDMI2.1 (8K@30Hz) Input Card
The MX_2xHDMI2.1 (8K@30Hz) Input Card adds two HDMI 2.1 inputs to NovaStar MX-Series COEX controllers (MX2000 Pro and MX6000 Pro), each supporting up to 8K (8192×4320@30Hz, forced) with HDR10, HLG, and HDCP 2.3. HDMI 2.1 makes it easy to take 8K output directly from modern consoles, media servers, and GPUs over the most common professional connector. Two inputs on one card streamline multi-source ultrahigh-resolution LED setups.
Promoción válida solo para el primer pedido minorista. Las cuentas de distribuidor, precio personalizado y términos no pueden combinarla con precios especiales.
Aplicaciones ideales
Perfect for a wide range of professional LED display scenarios
Multi-source 8K walls fed by HDMI 2.1 media servers and playback systems
Experiential installations using 8K-capable GPUs or consoles over HDMI
Dual-feed corporate and broadcast stages standardized on HDMI 2.1 sources
Large rental/staging canvases needing two high-bandwidth HDMI inputs per slot
Why HDMI 2.1 at 8K for an LED wall?
HDMI is the most widely deployed connector in professional AV, and HDMI 2.1 raises its bandwidth ceiling so a single cable can carry an 8K image. For an LED wall that means an 8K media server, GPU, or console plugs straight into the MX processor without adapters or signal-splitting, reducing the failure points of stitching multiple HDMI 2.0 feeds.
On large fine-pitch walls the pixel budget is enormous, and 8K HDMI 2.1 lets one source span far more of the canvas natively. Bandwidth is finite, so the top 8192×4320 mode is a forced 30Hz timing while lower resolutions allow higher refresh. HDR10/HLG preserves contrast and color, HDCP 2.3 handles protected content, and YCbCr 4:2:0 inputs require forced frame rates.
Puntos destacados
Especificaciones técnicas
📊 Supported Resolution & Format Capabilities
| Resolution | Color Space | Sampling | Bit Depth | Supported Frame Rates (Hz) |
|---|---|---|---|---|
| 8K — 8192×4320 (Forced) | ||||
| RGB / YCbCr | 4:4:4 | 8/10/12bit | 24/25/30 | |
| YCbCr | 4:2:2 | 8/10/12bit | 24/25/30 | |
| YCbCr | 4:2:0 | 8/10/12bit | 24/25/30 | |
| 8K — 7680×4320 (Forced) | ||||
| RGB / YCbCr | 4:4:4 | 8/10/12bit | 24/25/30 | |
| YCbCr | 4:2:2 | 8/10/12bit | 24/25/30 | |
| YCbCr | 4:2:0 | 8/10/12bit | 24/25/30 | |
| 5K — 5120×2880 (Forced) | ||||
| RGB / YCbCr | 4:4:4 | 8/10/12bit | 24/25/30/48/50/60/75 | |
| YCbCr | 4:2:2 | 8/10/12bit | 24/25/30/48/50/60/75 | |
| YCbCr | 4:2:0 | 8/10/12bit | 24/25/30/48/50/60/75 | |
| 4K — 4096×2160 (Forced) | ||||
| RGB / YCbCr | 4:4:4 | 8/10/12bit | 24/25/30/48/50/60/75/100/120 | |
| YCbCr | 4:2:2 | 8/10/12bit | 24/25/30/48/50/60/75/100/120 | |
| YCbCr | 4:2:0 | 8/10/12bit | 30/48/50/60/75/100/120 | |
| 4K — 3840×2160 | ||||
| RGB / YCbCr | 4:4:4 | 8/10/12bit | 24/25/30/48/50/60/75/100/120 | |
| YCbCr | 4:2:2 | 8/10/12bit | 24/25/30/48/50/60/75/100/120 | |
| YCbCr | 4:2:0 | 8/10/12bit | 48/50/60/75/100/120 | |
| 2K1K — 2560×1440 | ||||
| RGB / YCbCr | 4:4:4 | 8/10/12bit | 24/25/30/48/50/60/75/100/120/144/240 | |
| YCbCr | 4:2:2 | 8/10/12bit | 24/25/30/48/50/60/75/100/120/144/240 | |
| YCbCr | 4:2:0 | 8/10/12bit | 75/100/120/144/240 | |
| 1K — 1920×1080 | ||||
| RGB / YCbCr | 4:4:4 | 8/10/12bit | 24/25/30/48/50/60/75/100/120/144/240 | |
| YCbCr | 4:2:2 | 8/10/12bit | 24/25/30/48/50/60/75/100/120/144/240 | |
| YCbCr | 4:2:0 | 8/10/12bit | 120 | |
- Supports HDR10 and complies with SMPTE ST 2084 and SMPTE ST 2086 standards
- Supports HLG (Hybrid Log-Gamma)
- HDCP 2.3 compliant, backwards compatible with HDCP 2.2/HDCP 1.4/HDCP 1.3
- Supports preset resolutions up to 8192×4320 (8K)
- Many high-resolution and high-refresh-rate modes require forced resolution settings
- When using YCbCr 4:2:0 input, all frame rates need to be forced
Custom Resolution Calculator
Enter any resolution to calculate the maximum achievable frame rate for each input type. Bandwidth limits from NovaStar DCS (Device Configuration Schema).
Preguntas frecuentes
How many HDMI 2.1 inputs does this card provide?
Two HDMI 2.1 connectors, each supporting up to 8K, on a single card.
What is the maximum resolution and refresh rate?
Up to 8192×4320 (8K), with the full mode available at 30Hz as a forced timing; lower resolutions support higher refresh.
Which processors is it compatible with?
The MX-Series COEX controllers — MX2000 Pro and MX6000 Pro.
Does it support HDR and content protection?
Yes — HDR10 (SMPTE ST 2084 / ST 2086) and HLG, and HDCP 2.3 with backward compatibility to 2.2/1.4/1.3.
Why might I need to force a resolution or frame rate?
Many high-resolution/high-refresh modes require forced settings, and YCbCr 4:2:0 input requires forced frame rates from a capable source.
Can both HDMI 2.1 inputs run at 8K at once?
Each connector supports up to 8K (8192×4320@30Hz, forced); simultaneous use depends on the processor's total capacity and configuration — for layouts at the system limits, confirm with our team at 321-747-3220.
¿Qué garantía está incluida?
Todos los productos NovaStar incluyen una garantía completa del fabricante de 3 años cuando se compran a distribuidores autorizados como Olympian LED.
¿Ofrecen precios por volumen?
¡Sí! Como el distribuidor NovaStar más grande de EE. UU., ofrecemos precios especiales para pedidos a granel y clientes recurrentes. Contacte a nuestro equipo de ventas para una cotización personalizada.
¿Tienen esto en stock?
Mantenemos más de $2 millones en inventario en nuestro almacén de Titusville, Florida. La mayoría de los pedidos se envían el mismo día. Contáctenos para confirmar la disponibilidad actual.
¿Puedo obtener términos de pago NET 30?
Los términos NET 30 están disponibles para empresas calificadas y clientes establecidos. Contacte a nuestro equipo de ventas para discutir las opciones de pago.
Ready to Get Started?
For pricing, availability, or technical questions about the MX_2xHDMI2.1 (8K@30Hz) Input Card, contact Olympian LED today.
